Skip to content


0,00 kr
inkl. 25% MVA
SKU 800.94.89
Motul 300V 4T FactoryLine Road Racing 5W40 is a synthetic engine oil    Motul 300V 4T FactoryLine RoadRacing 5W40 is a synthetic, high performance, low-friction oil based on Estercore technology and has been specifically developed for racing motorcycles with 4T engines, which are designed for low-viscosity operation, for use in the MotoGP, SuperSport, Superbike , High-speed and mountain-biking, etc. Ideal for demanding motorcycles and quad motors in racing and in road areas.    Advantages:

- Max. Oil film stability, optimum adhesion, high temperature resistance for optimum wear protection
- Low traction coefficient of Estercore technology reduces friction losses and improves overall performance by up to 1.3%
- Estercore technology in combination with the additive package improves the shear strength, the wear protection and the service life of the engine and gearbox. This is documented with the outstanding FZG (Research Center for Gear and Gearbox Construction) Test Results of the Damage Load Level> 14 FLS (Failure Load Stage). The smaller the value, eg 1 FLS, the lower the wear protection, the higher the value eg> 14 FLS, the better the wear protection of the transmission. With this test, it can be determined whether an adequate lubricating film thickness between the gear wheels ensures a reliable function of the transmission
- Very high pressure absorption capability ensures maximum lubrication safety even in extreme temperature ranges
- For modern engine technology with wet clutch and gearbox lubrication in the same oil bath. No clutch gluing and slipping
- Fastest oiling in the starting phase reduces the critical cold start wear and ensures a long service life of the engine    Estercore Technology:

Motul has been developing high-performance engine oils based on synthetic esters for several decades. The special selection of synthetic esters and combination with an innovative additive package form an extraordinary synergy. Estercore is the latest technological development stage and allows maximum power output of the motor without compromising reliability and wear.    Specifications / Approvals:

Specifications: Exceeds the requirements of JASO & API
Approvals: JASO T903 Annex A (JASO MA friction requirements)